How to Fix Whirlpool Washer Error F0E0

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Washer Difficulty: Hard

Problem: No error code stored – communication failure between control boards preventing code retrieval

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Washer Error

Unplug washer for 10 minutes to fully reset all control boards.
Remove top panel to access main control board (CCU) connections.
Disconnect and reconnect all wire harnesses at CCU, especially serial communication cables.
Inspect harness routing for pinch points between cabinet panels or near moving components.
Check for moisture damage or corrosion on board connectors – clean with electrical contact cleaner if needed.
Verify 120V AC power supply to CCU is stable (no voltage sags during operation).
Enter diagnostic mode per model-specific procedure to force error code display.
If F0E0 persists after harness reseating, suspect corrupted EEPROM on CCU.
Replace main control board assembly W
After replacement, run full diagnostic cycle and document any new error codes that appear for further troubleshooting.

OEM Part #: W10461397

Estimated Market Price: $220

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Whirlpool error codes: Whirlpool Error Codes