Skip to main content
Appliance Fix Guide

Whirlpool Washer error code

Whirlpool Washer Error F02

Unplug washer and turn off water supply.

Unplug washer and turn off water supply.

UnknownStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Whirlpool washer repair guide for error F02
Error codeF02Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Unplug washer and turn off water supply

    Unplug washer and turn off water supply.

  2. 2
    Remove lower front panel by unscrewing 3 torx

    Remove lower front panel by unscrewing 3 torx screws at bottom.

  3. 3
    Place towels underneath and slowly remove drain pump

    Place towels underneath and slowly remove drain pump filter cap (turn counterclockwise) to drain residual water.

A quick explanation

What does F02 mean?

Unplug washer and turn off water supply.

The answer you came for

How to fix Whirlpool washer error F02

Start with the safest checks and work from simple to technical.

  1. 1

    Unplug washer and turn off water supply

    Unplug washer and turn off water supply.

  2. 2

    Remove lower front panel by unscrewing 3 torx

    Remove lower front panel by unscrewing 3 torx screws at bottom.

  3. 3

    Place towels underneath and slowly remove drain pump

    Place towels underneath and slowly remove drain pump filter cap (turn counterclockwise) to drain residual water.

  4. 4

    Inspect and clean pump filter of coins, hairpins,

    Inspect and clean pump filter of coins, hairpins, and debris.

  5. 5

    Manually rotate impeller inside pump housing to verify

    Manually rotate impeller inside pump housing to verify free movement (should spin 360° without binding).

  6. 6

    Check drain hose for kinks, clogs, or improper

    Check drain hose for kinks, clogs, or improper height (must not exceed 96 inches above floor).

  7. 7

    Verify drain hose isn't inserted >

    Verify drain hose isn't inserted >

  8. 8

    5 inches into standpipe causing siphoning

    5 inches into standpipe causing siphoning.

  9. 9

    If impeller is broken or pump doesn't run

    If impeller is broken or pump doesn't run during drain cycle, replace drain pump assembly W

  10. 10

    Test operation after repair

    Test operation after repair.

Read the additional checks from the current guide

How to Fix Washer Error Unplug washer and turn off water supply.Remove lower front panel by unscrewing 3 torx screws at bottom.Place towels underneath and slowly remove drain pump filter cap (turn counterclockwise) to drain residual water.Inspect and clean pump filter of coins, hairpins, and debris.Manually rotate impeller inside pump housing to verify free movement (should spin 360° without binding).Check drain hose for kinks, clogs, or improper height (must not exceed 96 inches above floor).Verify drain hose isn't inserted >5 inches into standpipe causing siphoning.If impeller is broken or pump doesn't run during drain cycle, replace drain pump assembly WTest operation after repair. As an Amazon Associate, we earn from qualifying purchases through links on this page.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: W11399437

Price noted in the current guide: $85

Why this part is shown: It is associated with Whirlpool Washer error F02 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Whirlpool Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.