⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Washer Difficulty: Moderate
Problem: Water overflow detected – pressure switch or valve failure
How to Fix Washer Error
- Turn off power and water supply immediately.
- Remove standing water from washer bottom with towels or wet vacuum.
- Check pressure switch tube for kinks, cracks, or disconnections.
- Inspect water level pressure switch for proper operation.
- Test pressure switch contacts with multimeter while blowing into tube.
- Check inlet valve operation for proper shut-off function.
- Inspect drain system for blockages preventing proper drainage.
- If pressure switch is faulty, replace pressure switch assembly.
- Clean pressure switch tube and connections thoroughly.
- Test fill cycle with manual monitoring to verify proper water level control.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Kenmore error codes: Kenmore Error Codes
Leave a Reply