⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F0 E2 Difficulty: Easy
Problem: Over Suds Condition
How to Fix F0 E2 Error (Step-by-Step)
- Recognize this code means the washer has detected too many suds, likely from using too much or the wrong type of detergent.
- Do not add more detergent or try to stop the machine. The washer will automatically try to fix this.
- Allow the cycle to continue. The washer will pause and perform additional rinses to break down the excess suds.
- Be aware that this process will likely extend the total wash time.
- After the cycle completes, run an empty ‘Clean Washer’ or ‘Normal’ cycle with hot water to flush out any remaining residue.
- In the future, make sure you are only using detergent marked as High-Efficiency (HE).
- Reduce the amount of HE detergent used per load, especially with soft water or lightly soiled clothes.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply