⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: ER-08 Difficulty: Hard
Problem: A user interface control failure has occurred.
How to Fix ER-08 Error (Step-by-Step)
- Disconnect the dishwasher from power at the circuit breaker to prevent electric shock.
- Open the dishwasher door and remove the screws around the perimeter of the inner door panel.
- Carefully separate the inner and outer door panels to expose the electronic components inside.
- Locate the user interface control board, which is the circuit board connected to the selection buttons.
- Take a photo of the wire connections for reference, then carefully disconnect all wiring harnesses and ribbon cables from the old board.
- Remove the mounting screws holding the old user interface board and replace it with the new one.
- Reconnect all wires, reassemble the door panels, and restore power to check if the controls are responsive.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 5304517208
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply