Skip to main content
Appliance Fix Guide

Electrolux Dishwasher error code

Electrolux Dishwasher Error ER-06-2

A lower fan failure has occurred.

A lower fan failure has occurred.

HardStart with 5-15 minutes of safe checks
Diagnose before buying a part
Electrolux dishwasher repair guide for error ER-06-2
Error codeER-06-2Dishwasher

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Perform a hard reset

    Perform a hard reset. Turn off the dishwasher at the circuit breaker for at least 5 minutes to clear any temporary glitches with the control board.

  2. 2
    Turn the power back on

    Turn the power back on. After 5 minutes, restore power at the circuit breaker.

  3. 3
    Enter the service check mode

    Enter the service check mode. This process can vary, but a common method is to turn the dishwasher off, then press and hold the two leftmost buttons while turning the power back on. Release the buttons when the LEDs light up.

A quick explanation

What does ER-06-2 mean?

A lower fan failure has occurred.

The answer you came for

How to fix Electrolux dishwasher error ER-06-2

Start with the safest checks and work from simple to technical.

  1. 1

    Perform a hard reset

    Perform a hard reset. Turn off the dishwasher at the circuit breaker for at least 5 minutes to clear any temporary glitches with the control board.

  2. 2

    Turn the power back on

    Turn the power back on. After 5 minutes, restore power at the circuit breaker.

  3. 3

    Enter the service check mode

    Enter the service check mode. This process can vary, but a common method is to turn the dishwasher off, then press and hold the two leftmost buttons while turning the power back on. Release the buttons when the LEDs light up.

  4. 4

    Clear stored error codes

    Clear stored error codes. Once in service mode, press the lower-left button one time. This should cause the LEDs to flash and may produce a beep, indicating the error memory has been cleared.

  5. 5

    Exit the check mode

    Exit the check mode. Turn the dishwasher off using the power button to return to normal operation.

  6. 6

    Run a test cycle

    Run a test cycle. Start a normal wash cycle and let it run completely through to the drying phase to see if the ER-06 code reappears.

  7. 7

    If the error returns, it indicates a persistent

    If the error returns, it indicates a persistent fault with the lower fan or its wiring, which will require professional service.

  8. 8

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

  9. 9

    Electrolux dishwasher drain pump Common replacement category

    Electrolux dishwasher drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying. Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks. Search Amazon for Electrolux dishwasher drain pump

  10. 10

    Electrolux dishwasher water inlet valve Common replacement category

    Electrolux dishwasher water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying. Why this category can matter: fill or low-water symptoms after supply and float checks. Search Amazon for Electrolux dishwasher water inlet valve

  11. 11

    Electrolux dishwasher control board Common replacement category

    Electrolux dishwasher control board Common replacement category: Electronic control board Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying. Why this category can matter: repeating control faults after latch, wiring, and power checks. Search Amazon for Electrolux dishwasher control board

Read the additional checks from the current guide

How to Fix ER-06 Error (Step-by-Step) Perform a hard reset. Turn off the dishwasher at the circuit breaker for at least 5 minutes to clear any temporary glitches with the control board. Turn the power back on. After 5 minutes, restore power at the circuit breaker. Enter the service check mode. This process can vary, but a common method is to turn the dishwasher off, then press and hold the two leftmost buttons while turning the power back on. Release the buttons when the LEDs light up. Clear stored error codes. Once in service mode, press the lower-left button one time. This should cause the LEDs to flash and may produce a beep, indicating the error memory has been cleared. Exit the check mode. Turn the dishwasher off using the power button to return to normal operation. Run a test cycle. Start a normal wash cycle and let it run completely through to the drying phase to see if the ER-06 code reappears. If the error returns, it indicates a persistent fault with the lower fan or its wiring, which will require professional service. Turn the appliance off, wait about 2 minutes, then turn it back on. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux dishwasher drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying. Why this category can matter: standing-water, drain, and incomplete-cycle symptoms after filter and hose checks. Search Amazon for Electrolux dishwasher drain pump Electrolux dishwasher water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying. Why this category can matter: fill or low-water symptoms after supply and float checks. Search Amazon for Electrolux dishwasher water inlet valve Electrolux dishwasher control board Common replacement category: Electronic control board Fit note: Exact OEM part number varies by complete Electrolux dishwasher model number. Confirm compatibility before buying. Why this category can matter: repeating control faults after latch, wiring, and power checks. Search Amazon for Electrolux dishwasher control board Before ordering: match the part to the complete Electrolux dishwasher model number on the appliance tag. Repair-Or-Replace Cost Calculator Use this calculator when the Electrolux dishwasher still fails after the basic checks. Compare the estimated repair cost, appliance age, and replacement price before ordering parts. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure. Browse all Electrolux error codes: Electrolux Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Electrolux Dishwasher error ER-06-2 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your dishwasher?

If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Dishwasher Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.