⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: TEMPERATURE ALARM Difficulty: Hard
Problem: Indicates that the internal temperature of the refrigerator or freezer has exceeded a safe level.
How to Fix TEMPERATURE ALARM Error (Step-by-Step)
- Unplug the refrigerator from the power outlet for safety and confirm the error stays cleared during a full test cycle.
- Locate the thermistor inside the fresh food or freezer compartment. It is usually behind a small plastic cover on the side or back wall.
- Gently pry off the cover with a small flathead screwdriver.
- Disconnect the wire harness attached to the thermistor and confirm the error stays cleared during a full test cycle.
- Remove the old thermistor. It may be held in place by a clip or screw.
- Install the new thermistor and reconnect the wire harness and confirm the error stays cleared during a full test cycle.
- Snap the cover back into place and plug the refrigerator back in.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- Thermistor (Temperature Sensor): W10316760
- Thermistor (Temperature Sensor): WPW10383615
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply