How to Fix Maytag Dryer Error 02

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: 02 Difficulty: Moderate

Problem: Not Heating

How to Fix 02 Error

Disconnect the dryer from power at the circuit breaker. This is a critical safety step.
Access the rear of the dryer. The thermal fuse is a small white plastic component located on the heater duct or blower housing.
Disconnect the two wires from the fuse and test it for continuity with a multimeter. A good fuse will have continuity (near zero ohms); a blown fuse will read open (infinite ohms).
If the fuse is blown, replace it. Also, test the heating element for continuity. A good element will read between 7-12 ohms. If it’s open, it also needs replacement.
Reassemble the dryer and restore power.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

OEM Part #: WP3392519 (Thermal Fuse)

Estimated Market Price: N/A

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Maytag error codes: Maytag Error Codes