Skip to main content
Appliance Fix Guide

Maytag Dryer error code

Maytag Dryer Error AF

Power off dryer and remove lint screen—clean thoroughly under warm running water to dissolve

Power off dryer and remove lint screen—clean thoroughly under warm running water to dissolve fabric softener residue, scrub gently with soft brush, rinse completely, and dry before reinstalling.

EasyStart with 5-15 minutes of safe checks
informationalno_parts
Maytag dryer repair guide for error AF
Error codeAFDryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Power off dryer and remove lint screen—clean thoroughly

    Power off dryer and remove lint screen—clean thoroughly under warm running water to dissolve fabric softener residue, scrub gently with soft brush, rinse completely, and dry before reinstalling.

  2. 2
    Disconnect flexible vent hose from dryer exhaust outlet—inspect

    Disconnect flexible vent hose from dryer exhaust outlet—inspect entire length for kinks, crushing, or lint blockages. Use dryer vent cleaning brush kit to remove lint buildup.

  3. 3
    Inspect exterior vent termination—remove cover and clean flapper

    Inspect exterior vent termination—remove cover and clean flapper mechanism, verify no bird nests or debris inside vent pipe.

A quick explanation

What does AF mean?

Power off dryer and remove lint screen—clean thoroughly under warm running water to dissolve fabric softener residue, scrub gently with soft brush, rinse completely, and dry before reinstalling.

The answer you came for

How to fix Maytag dryer error AF

Start with the safest checks and work from simple to technical.

  1. 1

    Power off dryer and remove lint screen—clean thoroughly

    Power off dryer and remove lint screen—clean thoroughly under warm running water to dissolve fabric softener residue, scrub gently with soft brush, rinse completely, and dry before reinstalling.

  2. 2

    Disconnect flexible vent hose from dryer exhaust outlet—inspect

    Disconnect flexible vent hose from dryer exhaust outlet—inspect entire length for kinks, crushing, or lint blockages. Use dryer vent cleaning brush kit to remove lint buildup.

  3. 3

    Inspect exterior vent termination—remove cover and clean flapper

    Inspect exterior vent termination—remove cover and clean flapper mechanism, verify no bird nests or debris inside vent pipe.

  4. 4

    Measure total vent run length—should not exceed 40

    Measure total vent run length—should not exceed 40 feet equivalent (subtract 5 feet for each 90° elbow,

  5. 5

    5 feet for each 45° elbow)

    5 feet for each 45° elbow).

  6. 6

    Remove rear panel and inspect blower wheel housing—vacuum

    Remove rear panel and inspect blower wheel housing—vacuum all lint buildup around wheel and housing interior.

  7. 7

    Inspect blower wheel for cracks, missing fins, or

    Inspect blower wheel for cracks, missing fins, or wobble on shaft—replace if damaged (WPW

  8. 8

    Check drum front and rear seals for tears

    Check drum front and rear seals for tears allowing air bypass—replace if damaged.

  9. 9

    Reconnect vent system with minimal bends and proper

    Reconnect vent system with minimal bends and proper support clamps.

  10. 10

    Run test cycle on timed dry (bypassing moisture

    Run test cycle on timed dry (bypassing moisture sensor) and verify strong, hot airflow at exterior vent.

  11. 11

    Error clears automatically after successful cycle with adequate

    Error clears automatically after successful cycle with adequate airflow—no button press required.

Read the additional checks from the current guide

How to Fix Dryer Error Power off dryer and remove lint screen—clean thoroughly under warm running water to dissolve fabric softener residue, scrub gently with soft brush, rinse completely, and dry before reinstalling.Disconnect flexible vent hose from dryer exhaust outlet—inspect entire length for kinks, crushing, or lint blockages. Use dryer vent cleaning brush kit to remove lint buildup.Inspect exterior vent termination—remove cover and clean flapper mechanism, verify no bird nests or debris inside vent pipe.Measure total vent run length—should not exceed 40 feet equivalent (subtract 5 feet for each 90° elbow,5 feet for each 45° elbow).Remove rear panel and inspect blower wheel housing—vacuum all lint buildup around wheel and housing interior.Inspect blower wheel for cracks, missing fins, or wobble on shaft—replace if damaged (WPW.Check drum front and rear seals for tears allowing air bypass—replace if damaged.Reconnect vent system with minimal bends and proper support clamps.Run test cycle on timed dry (bypassing moisture sensor) and verify strong, hot airflow at exterior vent.Error clears automatically after successful cycle with adequate airflow—no button press required.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Maytag Dryer error AF points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Maytag Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.