Skip to main content
Appliance Fix Guide

Maytag Washer error code

Maytag Washer Error F1E2

UNPLUG THE WASHER. This is a critical error indicating a fault in the Motor

UNPLUG THE WASHER. This is a critical error indicating a fault in the Motor Control Unit (MCU).

ModerateStart with 5-15 minutes of safe checks
Diagnose before buying a part
Maytag washer repair guide for error F1E2
Error codeF1E2Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    UNPLUG THE WASHER

    UNPLUG THE WASHER. This is a critical error indicating a fault in the Motor Control Unit (MCU).

  2. 2
    The MCU is located at the bottom of

    The MCU is located at the bottom of the washer, attached near the drive motor. You will need to tilt the washer back or lay it on its front (on protective blankets) to access the bottom panel.

  3. 3
    Check all wire harness connections to the MCU

    Check all wire harness connections to the MCU and the motor for a secure fit. Look for any signs of damage or burnt components.

A quick explanation

What does F1E2 mean?

UNPLUG THE WASHER. This is a critical error indicating a fault in the Motor Control Unit (MCU).

The answer you came for

How to fix Maytag washer error F1E2

Start with the safest checks and work from simple to technical.

  1. 1

    UNPLUG THE WASHER

    UNPLUG THE WASHER. This is a critical error indicating a fault in the Motor Control Unit (MCU).

  2. 2

    The MCU is located at the bottom of

    The MCU is located at the bottom of the washer, attached near the drive motor. You will need to tilt the washer back or lay it on its front (on protective blankets) to access the bottom panel.

  3. 3

    Check all wire harness connections to the MCU

    Check all wire harness connections to the MCU and the motor for a secure fit. Look for any signs of damage or burnt components.

  4. 4

    If all wiring is intact, the MCU has

    If all wiring is intact, the MCU has failed and must be replaced. Disconnect the harnesses, remove the mounting screws, and swap the board.

Read the additional checks from the current guide

How to Fix F1E2 Error UNPLUG THE WASHER. This is a critical error indicating a fault in the Motor Control Unit (MCU).The MCU is located at the bottom of the washer, attached near the drive motor. You will need to tilt the washer back or lay it on its front (on protective blankets) to access the bottom panel.Check all wire harness connections to the MCU and the motor for a secure fit. Look for any signs of damage or burnt components.If all wiring is intact, the MCU has failed and must be replaced. Disconnect the harnesses, remove the mounting screws, and swap the board. As an Amazon Associate, we earn from qualifying purchases through links on this page.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: W10374126 (Motor Control Unit - MCU)

Why this part is shown: It is associated with Maytag Washer error F1E2 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Maytag Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.