Samsung Washer error code
Samsung Washer Error EB
UNPLUG THE WASHER. This is a legacy code for a motor tachometer or Hall
UNPLUG THE WASHER. This is a legacy code for a motor tachometer or Hall Sensor error.
Try these first
Start here before buying a part or taking the appliance apart.
- 1UNPLUG THE WASHER
UNPLUG THE WASHER. This is a legacy code for a motor tachometer or Hall Sensor error.
- 2You must access the motor at the back
You must access the motor at the back of the machine. Remove the rear panel.
- 3Use a socket wrench to remove the large
Use a socket wrench to remove the large bolt in the center of the motor's rotor. Pull the rotor off the stator.
A quick explanation
What does EB mean?
UNPLUG THE WASHER. This is a legacy code for a motor tachometer or Hall Sensor error.
The answer you came for
How to fix Samsung washer error EB
Start with the safest checks and work from simple to technical.
- 1
UNPLUG THE WASHER
UNPLUG THE WASHER. This is a legacy code for a motor tachometer or Hall Sensor error.
- 2
You must access the motor at the back
You must access the motor at the back of the machine. Remove the rear panel.
- 3
Use a socket wrench to remove the large
Use a socket wrench to remove the large bolt in the center of the motor's rotor. Pull the rotor off the stator.
- 4
The Hall Sensor is a small plastic piece
The Hall Sensor is a small plastic piece attached to the stator (the part with copper windings). Disconnect its wire and unclip or unscrew it.
- 5
Install the new Hall Sensor, reassemble the rotor
Install the new Hall Sensor, reassemble the rotor and bolt (tighten securely), and reattach the back panel.
- 6
Restart the washer and confirm the EB message
Restart the washer and confirm the EB message returns under the same condition instead of after a one-time interruption.
- 7
Check the simple causes first
Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.
- 8
Inspect accessible wiring connectors and moisture-prone areas before
Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.
- 9
Use the complete Samsung washer model number from
Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.
- 10
If the EB code points to a specific
If the EB code points to a specific system, test that system directly before ordering replacement parts.
Read the additional checks from the current guide
How to Fix EB Error UNPLUG THE WASHER. This is a legacy code for a motor tachometer or Hall Sensor error.You must access the motor at the back of the machine. Remove the rear panel.Use a socket wrench to remove the large bolt in the center of the motor's rotor. Pull the rotor off the stator.The Hall Sensor is a small plastic piece attached to the stator (the part with copper windings). Disconnect its wire and unclip or unscrew it.Install the new Hall Sensor, reassemble the rotor and bolt (tighten securely), and reattach the back panel. Samsung Washer EB Checks Before Replacing Parts Restart the washer and confirm the EB message returns under the same condition instead of after a one-time interruption. Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability. Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed. Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category. If the EB code points to a specific system, test that system directly before ordering replacement parts. Recommended Parts to Check Samsung washer parts for EB error Estimated part range: $25-$180 Confirm compatibility with your full Samsung washer model number before ordering. Check Price & Availability ->
Recommended part
Recommended part for this error code
No replacement part recommended for this code
The researched guidance for Samsung Washer error EB points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.
Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Samsung Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.