How to Fix GE Dryer Error 001

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: 001 Difficulty: Moderate

Problem: Inlet thermistor failure – temperature sensor reading out of range

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix 001 Error

UNPLUG THE DRYER. This code indicates the inlet thermistor has failed (open circuit or out of range).
The inlet thermistor is located on the blower housing or heater assembly. Remove the front or rear panel to access it.
Disconnect the wire harness from the thermistor. Use a multimeter set to Ohms (Ω) to test its resistance.
At room temperature (~77°F/25°C), it should read approximately 10,000 ohms (10kΩ). An ‘open’ or infinite reading (often displayed as ‘OL’) confirms it’s bad.
Unscrew the old thermistor, install the new one, reconnect the wiring, and reassemble the dryer.

OEM Part #: WE04X25996 (Thermistor)

Estimated Market Price: $15-$35

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your GE model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Ge error codes: Ge Error Codes