How to Fix Samsung Washer Error FL3

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: FL3 Difficulty: Moderate

Problem: Flash code: 3 blink pattern = drain system fault (models without display)

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix FL3 Error

For models with LED blink patterns: 3 blinks indicates drain error.
Remove lower front panel and clear drain filter completely of debris.
Inspect pump impeller for obstructions or damage by rotating manually.
Test pump resistance across terminals (12-18Ω normal).
Verify 120V AC present at pump connector during drain cycle attempt.
Check drain hose for kinks beyond 90° bends and ensure standpipe height <96 inches.
Replace drain pump DC34-00008A if impeller damaged, motor open-circuit, or resistance out of spec.
After repair, run diagnostic drain test to verify complete evacuation within 8 minutes.

OEM Part #: DC34-00008A

Estimated Market Price: $85

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Samsung error codes: Samsung Error Codes