Skip to main content
Appliance Fix Guide

Samsung Washer error code

Samsung Washer Error 3E2

Inspect hall sensor wiring harness for chafing against sharp edges near motor mounting points.

Inspect hall sensor wiring harness for chafing against sharp edges near motor mounting points.

HardStart with 5-15 minutes of safe checks
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
Samsung washer repair guide for error 3E2
Error code3E2Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Inspect hall sensor wiring harness for chafing against

    Inspect hall sensor wiring harness for chafing against sharp edges near motor mounting points.

  2. 2
    Wiggle sensor connector while monitoring resistance with multimeter

    Wiggle sensor connector while monitoring resistance with multimeter - intermittent changes indicate bad connection.

  3. 3
    Replace hall sensor DC31-00138A if intermittent readings detected

    Replace hall sensor DC31-00138A if intermittent readings detected during wiggle test.

A quick explanation

What does 3E2 mean?

Inspect hall sensor wiring harness for chafing against sharp edges near motor mounting points.

The answer you came for

How to fix Samsung washer error 3E2

Start with the safest checks and work from simple to technical.

  1. 1

    Inspect hall sensor wiring harness for chafing against

    Inspect hall sensor wiring harness for chafing against sharp edges near motor mounting points.

  2. 2

    Wiggle sensor connector while monitoring resistance with multimeter

    Wiggle sensor connector while monitoring resistance with multimeter - intermittent changes indicate bad connection.

  3. 3

    Replace hall sensor DC31-00138A if intermittent readings detected

    Replace hall sensor DC31-00138A if intermittent readings detected during wiggle test.

  4. 4

    Check motor mounting bolts for looseness causing vibration-induced

    Check motor mounting bolts for looseness causing vibration-induced signal loss (torque to 15 ft-lbs).

  5. 5

    Verify 15V DC supply to hall sensor at

    Verify 15V DC supply to hall sensor at PCB connector pin 3 (critical for signal integrity).

  6. 6

    If power supply unstable or signal distorted

    If power supply unstable or signal distorted: replace main PCB DC92-01543A.

  7. 7

    After repair, run diagnostic spin test to verify

    After repair, run diagnostic spin test to verify stable RPM feedback.

  8. 8

    Restart the washer and confirm the 3E2 message

    Restart the washer and confirm the 3E2 message returns under the same condition instead of after a one-time interruption.

  9. 9

    Check the simple causes first

    Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.

  10. 10

    Inspect accessible wiring connectors and moisture-prone areas before

    Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.

  11. 11

    Use the complete Samsung washer model number from

    Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.

  12. 12

    If the 3E2 code points to a specific

    If the 3E2 code points to a specific system, test that system directly before ordering replacement parts.

Read the additional checks from the current guide

How to Fix 3E2 Error Inspect hall sensor wiring harness for chafing against sharp edges near motor mounting points.Wiggle sensor connector while monitoring resistance with multimeter - intermittent changes indicate bad connection.Replace hall sensor DC31-00138A if intermittent readings detected during wiggle test.Check motor mounting bolts for looseness causing vibration-induced signal loss (torque to 15 ft-lbs).Verify 15V DC supply to hall sensor at PCB connector pin 3 (critical for signal integrity).If power supply unstable or signal distorted: replace main PCB DC92-01543A.After repair, run diagnostic spin test to verify stable RPM feedback. Samsung Washer 3E2 Checks Before Replacing Parts Restart the washer and confirm the 3E2 message returns under the same condition instead of after a one-time interruption. Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability. Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed. Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category. If the 3E2 code points to a specific system, test that system directly before ordering replacement parts. Recommended Parts to Check Samsung washer parts for 3E2 error Estimated part range: $25-$180 Confirm compatibility with your full Samsung washer model number before ordering. Check Price & Availability ->

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Samsung Washer error 3E2 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Samsung Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.