Skip to main content
Appliance Fix Guide

Samsung Washer error code

Samsung Washer Error FE

Inspect pressure tube for cracks near connections - common failure point at sensor connector

Inspect pressure tube for cracks near connections - common failure point at sensor connector (wiggle test while monitoring frequency).

UnknownStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Samsung washer repair guide for error FE
Error codeFEWasher

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Inspect pressure tube for cracks near connections -

    Inspect pressure tube for cracks near connections - common failure point at sensor connector (wiggle test while monitoring frequency).

  2. 2
    Disconnect tube at sensor and blow through entire

    Disconnect tube at sensor and blow through entire length to clear blockages (use compressed air at

  3. 3
    Test sensor resistance at rest (should read

    Test sensor resistance at rest (should read

A quick explanation

What does FE mean?

Inspect pressure tube for cracks near connections - common failure point at sensor connector (wiggle test while monitoring frequency).

The answer you came for

How to fix Samsung washer error FE

Start with the safest checks and work from simple to technical.

  1. 1

    Inspect pressure tube for cracks near connections -

    Inspect pressure tube for cracks near connections - common failure point at sensor connector (wiggle test while monitoring frequency).

  2. 2

    Disconnect tube at sensor and blow through entire

    Disconnect tube at sensor and blow through entire length to clear blockages (use compressed air at

  3. 3

    Test sensor resistance at rest (should read

    Test sensor resistance at rest (should read

  4. 4

    5kΩ on analog sensors)

    5kΩ on analog sensors).

  5. 5

    Apply gentle suction to tube while monitoring resistance

    Apply gentle suction to tube while monitoring resistance - should decrease smoothly to ~500Ω without jumps.

  6. 6

    Replace pressure sensor DC96-01703G if resistance doesn't change

    Replace pressure sensor DC96-01703G if resistance doesn't change with pressure or shows erratic fluctuations.

  7. 7

    Check tub air dome for clogs - remove

    Check tub air dome for clogs - remove hose clamp and clean port with small brush or pipe cleaner.

  8. 8

    Verify no water trapped in pressure tube causing

    Verify no water trapped in pressure tube causing False high-level signal - tube must be completely dry during operation.

  9. 9

    Restart the washer and confirm the FE message

    Restart the washer and confirm the FE message returns under the same condition instead of after a one-time interruption.

  10. 10

    Check the simple causes first

    Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.

  11. 11

    Inspect accessible wiring connectors and moisture-prone areas before

    Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.

  12. 12

    Use the complete Samsung washer model number from

    Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.

Read the additional checks from the current guide

How to Fix FE Error Inspect pressure tube for cracks near connections - common failure point at sensor connector (wiggle test while monitoring frequency).Disconnect tube at sensor and blow through entire length to clear blockages (use compressed air at

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Samsung Washer error FE points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Samsung Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.