Samsung Washer E1 Checks Before Replacing Parts
- Restart the washer and confirm the E1 message returns under the same condition instead of after a one-time interruption.
- Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.
- Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.
- Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.
- If the E1 code points to a specific system, test that system directly before ordering replacement parts.
Error Code: E1 Difficulty: Moderate
Problem: The machine is not filling with water fast enough. Check for kinked hoses or clogged screens on the water inlet valves. If water pressure is good, the valve itself may be broken.
How to Fix E1 Error
- UNPLUG washer immediately. Remove standing water under unit with towels or wet/dry vacuum.
- Tilt washer forward carefully (with assistance) to access base pan. Locate moisture sensor pad under tub.
- Dry sensor pad thoroughly with lint-free cloth. Allow 60 minutes air drying time.
- Inspect door bellow gasket for tears, cracks, or mold buildup. Stretch gasket to check entire circumference.
- If bellow damaged, replace using OEM part DC64-00110A: remove spring clamp, extract old bellow, install new bellow ensuring lip seats fully in tub groove, secure with new clamp.
- If bellow intact, check tub weld seams, pump housing, and hose connections for leaks. Tighten loose clamps.
- If sensor remains triggered after drying and leak repair, replace moisture sensor using OEM part DC34-00060A.
- Reassemble. Run fill/drain test cycle with panels off to confirm no leaks before final reassembly.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Still Not Working?
If the Samsung washer E1 error returns after the basic checks, stop and recheck the full model number, the exact symptom, wiring, sensors, water or drain path, and visible component condition before buying another part.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error CodesExpert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply