Skip to main content
Appliance Fix Guide

Samsung Washer error code

Samsung Washer Error LE

Tilt machine backward to drain base pan water completely onto towels.

Tilt machine backward to drain base pan water completely onto towels.

EasyStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Samsung washer repair guide for error LE
Error codeLEWasher

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Tilt machine backward to drain base pan water

    Tilt machine backward to drain base pan water completely onto towels.

  2. 2
    Locate leak sensor under tub (white disc with

    Locate leak sensor under tub (white disc with 2 wires, center-mounted).

  3. 3
    Dry sensor completely and inspect for mineral deposits

    Dry sensor completely and inspect for mineral deposits - clean contacts with vinegar-soaked cotton swab if corroded.

A quick explanation

What does LE mean?

Tilt machine backward to drain base pan water completely onto towels.

The answer you came for

How to fix Samsung washer error LE

Start with the safest checks and work from simple to technical.

  1. 1

    Tilt machine backward to drain base pan water

    Tilt machine backward to drain base pan water completely onto towels.

  2. 2

    Locate leak sensor under tub (white disc with

    Locate leak sensor under tub (white disc with 2 wires, center-mounted).

  3. 3

    Dry sensor completely and inspect for mineral deposits

    Dry sensor completely and inspect for mineral deposits - clean contacts with vinegar-soaked cotton swab if corroded.

  4. 4

    Check all hose connections at pump, valve, and

    Check all hose connections at pump, valve, and tub for drips using paper towel test (place towel under connections, run 2-minute fill cycle).

  5. 5

    Run empty cycle while observing base pan with

    Run empty cycle while observing base pan with flashlight to pinpoint leak source.

  6. 6

    Replace leak sensor DC96-01703A if dry but error

    Replace leak sensor DC96-01703A if dry but error returns immediately after power cycle.

  7. 7

    Address root cause leak before sensor replacement to

    Address root cause leak before sensor replacement to prevent recurrence - most common sources: pump seal, inlet valve, or tub gasket.

  8. 8

    Restart the washer and confirm the LE message

    Restart the washer and confirm the LE message returns under the same condition instead of after a one-time interruption.

  9. 9

    Check the simple causes first

    Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.

  10. 10

    Inspect accessible wiring connectors and moisture-prone areas before

    Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.

  11. 11

    Use the complete Samsung washer model number from

    Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.

  12. 12

    If the LE code points to a specific

    If the LE code points to a specific system, test that system directly before ordering replacement parts.

Read the additional checks from the current guide

How to Fix LE Error Tilt machine backward to drain base pan water completely onto towels.Locate leak sensor under tub (white disc with 2 wires, center-mounted).Dry sensor completely and inspect for mineral deposits - clean contacts with vinegar-soaked cotton swab if corroded.Check all hose connections at pump, valve, and tub for drips using paper towel test (place towel under connections, run 2-minute fill cycle).Run empty cycle while observing base pan with flashlight to pinpoint leak source.Replace leak sensor DC96-01703A if dry but error returns immediately after power cycle.Address root cause leak before sensor replacement to prevent recurrence - most common sources: pump seal, inlet valve, or tub gasket. Samsung Washer LE Checks Before Replacing Parts Restart the washer and confirm the LE message returns under the same condition instead of after a one-time interruption. Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability. Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed. Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category. If the LE code points to a specific system, test that system directly before ordering replacement parts. Recommended Parts to Check Samsung washer parts for LE error Estimated part range: $25-$180 Confirm compatibility with your full Samsung washer model number before ordering. Check Price & Availability ->

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Samsung Washer error LE points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Samsung Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.