Samsung Washer error code
Samsung Washer Error 5C
Clear drain filter thoroughly.
Clear drain filter thoroughly.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Clear drain filter thoroughly
Clear drain filter thoroughly.
- 2Disconnect pressure tube from pump housing and blow
Disconnect pressure tube from pump housing and blow through entire length to clear blockages.
- 3Test pressure switch continuity while blowing into tube
Test pressure switch continuity while blowing into tube - should click open/close at approximately
A quick explanation
What does 5C mean?
Clear drain filter thoroughly.
The answer you came for
How to fix Samsung washer error 5C
Start with the safest checks and work from simple to technical.
- 1
Clear drain filter thoroughly
Clear drain filter thoroughly.
- 2
Disconnect pressure tube from pump housing and blow
Disconnect pressure tube from pump housing and blow through entire length to clear blockages.
- 3
Test pressure switch continuity while blowing into tube
Test pressure switch continuity while blowing into tube - should click open/close at approximately
- 4
Inspect pump volute for foreign objects (remove 3
Inspect pump volute for foreign objects (remove 3 screws securing pump to tub assembly).
- 5
Rotate impeller manually - replace pump if binding
Rotate impeller manually - replace pump if binding or broken vanes detected.
- 6
Check for siphoning
Check for siphoning: ensure drain hose has proper air gap at standpipe (not sealed airtight).
- 7
Replace pressure switch DC61-02173A if no continuity change
Replace pressure switch DC61-02173A if no continuity change during pressure test or switch stuck closed.
- 8
Restart the washer and confirm the 5C message
Restart the washer and confirm the 5C message returns under the same condition instead of after a one-time interruption.
- 9
Check the simple causes first
Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability.
- 10
Inspect accessible wiring connectors and moisture-prone areas before
Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed.
- 11
Use the complete Samsung washer model number from
Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category.
- 12
If the 5C code points to a specific
If the 5C code points to a specific system, test that system directly before ordering replacement parts.
Read the additional checks from the current guide
How to Fix 5C Error Clear drain filter thoroughly.Disconnect pressure tube from pump housing and blow through entire length to clear blockages.Test pressure switch continuity while blowing into tube - should click open/close at approximately5 PSI.Inspect pump volute for foreign objects (remove 3 screws securing pump to tub assembly).Rotate impeller manually - replace pump if binding or broken vanes detected.Check for siphoning: ensure drain hose has proper air gap at standpipe (not sealed airtight).Replace pressure switch DC61-02173A if no continuity change during pressure test or switch stuck closed. Samsung Washer 5C Checks Before Replacing Parts Restart the washer and confirm the 5C message returns under the same condition instead of after a one-time interruption. Check the simple causes first: load balance, water supply, drain flow, door or lid closure, visible leaks, and power stability. Inspect accessible wiring connectors and moisture-prone areas before assuming the control board has failed. Use the complete Samsung washer model number from the door, lid, or rear tag before matching any pump, valve, sensor, suspension, lock, or board category. If the 5C code points to a specific system, test that system directly before ordering replacement parts. Recommended Parts to Check Samsung washer parts for 5C error Estimated part range: $25-$180 Confirm compatibility with your full Samsung washer model number before ordering. Check Price & Availability ->
Recommended part
Recommended part for this error code
No replacement part recommended for this code
The researched guidance for Samsung Washer error 5C points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.
Replacement options
Ready to replace your washer?
If repairing this washer no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$599
Budget-friendly washers in the $0-$599 range.
Shop Value Options on AmazonBest Overall
$600-$999
Balanced washers in the $600-$999 range.
Shop Best Overall Options on AmazonPremium
$1,000-$2,500
Higher-end washers in the $1,000-$2,500 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Samsung Washer Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.