How to Fix Samsung Washer Error 5E

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: 5E Difficulty: Moderate

Problem: Drain system fault – pump failure or main PCB relay issue

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix 5E Error

Clear drain filter thoroughly as per nd procedure.
Disconnect power for 10 minutes to reset PCB memory.
Inspect pump wiring harness at connector J4 on main PCB – look for burnt pins or moisture corrosion.
Reconnect power and enter diagnostic mode: press Temp + Delay Start + Power simultaneously, then press Temp 4 times to activate drain pump.
Listen for pump operation – if silent but voltage present (measure 120V AC at connector during drain cycle), replace drain pump DC34-00008A.
If no voltage at pump connector: check PCB relay RL4 continuity with multimeter (should read closed circuit when energized).
Replace main PCB DC92-01543A if relay defective or traces burned near relay location.

OEM Part #: DC34-00008A

Estimated Market Price: $95

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.