How to Fix Whirlpool Dishwasher Error E02

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dishwasher Difficulty: Moderate

Problem: Flow Meter / Inlet System Electrical Fault

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Dishwasher Error

Disconnect power at circuit breaker.
Turn off water supply valve under sink.
Remove lower access panel.
Place towels under drain area.
Disconnect drain hose from pump outlet.
Remove drain filter cover by turning counterclockwise.
Lift out drain filter and clean thoroughly under running water.
Inspect drain pump impeller – insert finger to check for free rotation and removeany debris.
Check entire drain hose path for kinks or blockages – straighten or replace hose if needed.
Reinstall drain filter and secure cover clockwise until tight.
Reconnect drain hose with new hose clamp.
Restore water and power.
Test drain cycle and listen for proper pump operation – should drain completely in 90 seconds.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

OEM Part #: WPW10195536

Estimated Market Price: $40-$90

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Whirlpool error codes: Whirlpool Error Codes