⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: tE2 Difficulty: Moderate
Problem: Inlet water thermistor fault (cold water monitoring sensor)
How to Fix tE2 Error
- Locate secondary thermistor near inlet valve assembly (top rear of machine behind control panel).
- Disconnect power and access sensor by removing top panel and control panel screws.
- Disconnect connector and measure resistance at ambient temperature (should match main thermistor curve).
- Compare readings to main tub thermistor – should be within 10% at same temperature.
- Replace inlet thermistor DC34-00024B (different OEM number from main tub sensor) if readings unstable or out of range.
- Check for water leaks around sensor housing causing False high-temperature readings.
- Inspect wiring harness for damage near sharp metal edges.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Samsung model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply