⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Moderate
Problem: Ice maker configuration error – control board detecting incompatible ice maker type after replacement
How to Fix Refrigerator Error
- Enter programming mode (Door Alarm + Freezer Down 3 sec).
- Navigate to ice maker configuration setting (typically code position
- .
- Verify settingmatches installed ice maker type: 0=no ice maker, 1=standard, 2=high-capacity.
- If incorrect, adjust setting using Temp Up/Down keys.
- Save by holding Freezer Down 3 seconds until flashing.
- If correct setting won’t save or PE ICE returns: ice maker harness has short circuit – inspect wiring between ice maker and main board.
- Last resort: main control board W10868991 has failed ice maker driver circuit – replace board and reprogram completely.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →

Leave a Reply