⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Moderate
Problem: Ice maker fault – no harvest cycle detected after 3 consecutive attempts indicating motor/module failure
How to Fix Refrigerator Error
- Unplug refrigerator.
- Remove ice bin and inspect ice maker mold for jammed cubes or ice bridge formation.
- Manually advance ice maker by inerting insulated screwdriver into test terminals (T-H) to initiate harvest cycle.
- Observe ejector fingers: should rotate 360° during harvest. Stuck fingers indicate seized motor or broken gear.
- Disconnect ice maker harness and test motor resistance: should read 50-200Ω.
- Test ice maker thermostat continuity: should close below 15°F.
- If motor/thermostat tests good but no operation, replace complete ice maker assembly WPW
- Check water inlet valve operation during fill cycle – no water indicates separate valve issue (not F5 code).
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →

Leave a Reply