How to Fix Maytag Dryer Error F3E5

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Hard

Problem: Control board thermistor circuit failure—ADC converter malfunction or reference voltage fault

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dryer Error

Disconnect power and remove rear panel.
Test BOTH inlet and exhaust thermistors per F3E1/F3E3 procedures to rule out sensor failure.
If both thermistors test within specification (10k±2k ohms at room temp), fault lies in control board circuitry.
Inspect control board WPW10111608 for visible damage near thermistor input circuits: burnt components, leaking capacitors, or cold solder joints around sensor connector pins.
Check wiring harness between thermistors and board for damage—repair any broken wires with high-temperature wire nuts.
If harness intact and sensors good but error persists, ADC (analog-to-digital converter) circuit on board has failed.
Control board cannot be economically repaired—replace WPW10111608 assembly.
During installation, ensure all sensor harness connectors are fully seated before powering on.
After replacement, run diagnostic mode to verify both thermistor readings display correctly and track temperature changes during test cycle.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

OEM Part #: WPW10111608

Estimated Market Price: $220

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Maytag error codes: Maytag Error Codes