How to Fix Maytag Dryer Error F2E3

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Easy

Problem: Moisture sensor communication error or intermittent connection

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Dryer Error

Unplug dryer and open door to locate moisture sensor bars inside drum opening.
Clean sensor bars thoroughly with isopropyl alcohol to remove fabric softener residue.
Remove front lower panel to access sensor wiring harness connection point.
Trace harness from sensor bars to main control board—check for pinched wires near drum support or sharp edges.
Disconnect harness at control board and inspect terminals for corrosion or bent pins.
Clean terminals with electronic contact cleaner and reconnect firmly.
Power on dryer and enter diagnostic mode (consult model-specific procedure).
Run moisture sensor test—should show resistance change when wet cloth touches sensor bars.
If no change detected after cleaning and reseating connections, replace moisture sensor assembly WPW
Route new harness carefully avoiding pinch points and secure with wire ties away from moving parts.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

OEM Part #: WPW10512957

Estimated Market Price: $42

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Maytag error codes: Maytag Error Codes