How to Fix Maytag Dryer Error d1

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Hard

Problem: Diagnostic code: Door sense circuit failure on control board or power line interference

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dryer Error

Enter diagnostic mode per model procedure (typically hold CHIME + TEMPERATURE buttons 3 seconds).
Observe if d1 appears consistently or intermittently—intermittent suggests wiring issue; consistent suggests board failure.
Unplug dryer and remove front lower panel to access door switch WPW10441007 wiring.
Inspect harness for damage near door hinge—repair any broken wires with high-temperature connectors.
Test door switch continuity—replace WPW10441007 if faulty.
Disconnect door switch harness at control board WPW10111608 and inspect pins for corrosion—clean with contact cleaner.
Reseat connector firmly and exit diagnostic mode.
If d1 returns immediately, control board door sense circuit has failed—replace WPW
After replacement, re-enter diagnostic mode and verify d1 code no longer appears in fault history.
Run full diagnostic cycle to confirm all sensors and actuators function correctly.

OEM Part #: WPW10111608

Estimated Market Price: $220

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.