⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Easy
Problem: Water supply valve turned off or water pressure too low
How to Fix Dishwasher Error
- Check that the household water supply valve is fully open.
- Verify water pressure at the supply line (minimum 20 PSI required).
- Inspect the water supply line for kinks or blockages.
- Remove the water inlet valve filter screen and clean with vinegar solution.
- Check for mineral buildup in the water inlet valve assembly.
- Inspect the water inlet valve solenoid for proper operation.
- Test the water inlet valve with a multimeter for proper resistance.
- If the valve is faulty, replace the water inlet valve assembly.
- Ensure the drain hose has proper high loop installation to prevent siphoning.
- Test the fill cycle and verify proper water level in the tub.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply