⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dishwasher Difficulty: Moderate
Problem: Heating element not energizing or temperaure sensor fault
How to Fix Dishwasher Error
- Turn off power at the circuit breaker.
- Remove the lower access panel to access the heating components.
- Test the heating element for continuity with a multimeter.
- Check the high-limit thermostat for proper operation.
- Test the temperature sensor resistance at room temperature.
- Inspect all wiring connections for corrosion or damage.
- Check the control board output to the heating circuit.
- Verify proper water fill level (insufficient water can cause heating errors).
- If components test good, suspect control board failure.
- Restore power and test the heating cycle with a temperature probe.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Maytag error codes: Maytag Error Codes
Leave a Reply