⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Easy
Problem: Freezer evaporator thermistor circuit fault (redundant sensor models)
How to Fix Refrigerator Error
- UNPLUG unit.
- Remove evaporator cover panel in freezer.
- Locate secondary freezer thermistor (may be mounted on opposite side of evaporator coil from primary sensor).
- Disconnect connector and test resistance.
- Replace if open/shorted or reading outside specification.
- Position sensor carefully to avoid contact with defrost heater wires.
- Secure in original location with clip or high-temp adhesive.
- Restore power and verify freezer temperature stabilizes at 0°F within 4 hours.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Kenmore error codes: Kenmore Error Codes


Leave a Reply