How to Fix Kenmore Refrigerator Error F22

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Moderate

Problem: Evaporator fan motor speed sensor fault (BLDC motor models)

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Refrigerator Error

UNPLUG unit.
Remove evaporator cover panel in freezer.
Locate evaporator fan motor with 5-wire harness (includes Hall effect sensor wires).
Disconnect harness and test motor windings AND sensor circuit per tech sheet.
Manually spin fan blade while monitoring sensor output with oscilloscope (if available) – should show clean pulse waveform.
If sensor circuit open/shorted or waveform erratic, replace entire fan motor assembly (sensor not serviceable separately).
Check wiring harness for damage between motor and control board.
After replacement, verify fan runs at proper speed (should not cycle on/off rapidly).

OEM Part #: W11395849

Estimated Market Price: $85-150

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.