How to Fix Kenmore Refrigerator Error F19

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Moderate

Problem: Condenser coil temperature sensor fault affecting compressor runtime

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

UNPLUG refrigerator and pull away from wall.
Remove rear lower access panel.
Locate condenser thermistor clipped to condenser coil tubing near compressor (small white probe).
Disconnect connector and test resistance (should read 5k-15k ohms at room temp).
Replace sensor if faulty.
Ensure new sensor makes full metal-to-metal contact with condenser tubing – poor contact causes False high-temp readings triggering premature compressor shutdown.
Secure with high-temp adhesive or original clip.
Clean condenser coils thoroughly while access panel removed.

OEM Part #: WPW10873805

Estimated Market Price: $65-120

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Kenmore error codes: Kenmore Error Codes