How to Fix Frigidaire Washer Error E83

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E83 Difficulty: Moderate

Problem: Console control problem.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix E83 Error (Step-by-Step)

Unplug the washer from the electrical outlet to prevent electric shock.
Gain access to the console control by removing the top panel or disassembling the front console area.
Before disconnecting anything, take a clear photo of the wiring connections to the user interface board for reference.
Gently unplug the wire connectors from the board and confirm the error stays cleared during a full test cycle.
Remove the mounting screws or unclip the tabs holding the board in place and remove the old board.
Install the new user interface board, making sure it is securely seated.
Reattach the wire connectors to the correct terminals on the new board and reassemble the console.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: (Varies by model) (User Interface Board)

Estimated Market Price: $85-$370

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Frigidaire error codes: Frigidaire Error Codes