How to Fix Frigidaire Washer Error E24

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E24 Difficulty: Hard

Problem: Problem with the drain pump relay.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix E24 Error (Step-by-Step)

Unplug the washing machine from its power source and confirm the error stays cleared during a full test cycle.
Slide the washer forward and remove the top panel by unscrewing it from the back.
Identify the main control board. It will have numerous wire harnesses connected to it.
To avoid errors, take a detailed picture of all the connections before you begin unplugging anything.
Systematically disconnect each wire harness from the old board. Pay attention to the small plastic locking clips on each connector.
Unscrew the old control board from its mounting points and carefully lift it out.
Secure the new main control board in place, reconnect all wires based on your reference photo, and reattach the top panel.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: (Varies by model) (Main Control Board)

Estimated Market Price: $100-$300

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Frigidaire model. Includes an easy-to-read list of every error code and quick diagnostic tips.