How to Fix Electrolux Refrigerator Error DF

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: DF Difficulty: Easy

Problem: Manual defrost mode is active.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix DF Error (Step-by-Step)

This mode is typically activated by a button combination on the control panel.
To exit this mode, you can usually press and hold the same button combination that started it.
Alternatively, unplugging the refrigerator for five minutes and plugging it back in will often cancel the defrost cycle.
The refrigerator should return to its normal cooling operation once the cycle is complete or canceled.
If the refrigerator remains in defrost mode, there may be an issue with the control board.
Turn the appliance off, wait about 2 minutes, then turn it back on.
Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes