Error Code: All STATUS lights flashing Difficulty: Moderate
Problem: General service error; service may be required.
How to Fix All STATUS lights flashing Error (Step-by-Step)
- Confirm the display is showing exactly All STATUS lights flashing and not a similar-looking code.
- Turn the washer off and disconnect power before opening panels or checking wiring.
- Check the simple causes first: load balance, hoses, water supply, drain path, and door or lid closure.
- Use the full model number from the washer tag before ordering any replacement part.
- Restore power and run a short test cycle after the basic checks are complete.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
- Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
What to Check Next on This Speed Queen Washer
Focused repair path: washer fill, drain, spin, lock, sensor, and control checks. Do not treat this as a reset-only problem if the code keeps returning; use what the appliance does during the failed part of the cycle to choose the next check.
- Unplug the washer for one minute, then restart only to confirm whether the same code returns after a clean power cycle.
- Check load balance, detergent level, water supply valves, inlet screens, drain hose height, and the drain path before replacing electronic parts.
- Inspect the lid or door lock, strike, harness, and connector if the symptom involves start, lock, or spin behavior.
- Match the timing of the fault to the likely part path: inlet valve, pressure sensor, drain pump, motor, lock assembly, wiring, or control.
- Use the complete Speed Queen washer model number before ordering parts, because the same code can use different assemblies across platforms.
Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Speed Queen model number from the appliance tag before ordering. The same error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, or control boards depending on the exact model.
Likely Parts to Check
No exact official OEM part number is listed here because the correct Speed Queen Washer part can vary by full model number. These are targeted part-category searches, not universal fit claims.
-
Speed Queen washer control boardCommon replacement category: Machine control boardFit note: Exact OEM part number varies by model. Confirm compatibility using the full model number before buying.Confidence: Medium
General service errors should be diagnosed by symptom and full model number before ordering any control part. -
Washer wiring harnessCommon replacement category: Wiring harnessFit note: Exact OEM part number varies by model. Confirm compatibility using the full model number before buying.Confidence: Medium
Intermittent faults can be caused by loose, damaged, or corroded connectors.
Before ordering: match the part to the complete model number on the appliance tag.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
When It’s Better to Replace Than Repair
Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:
For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Why Upgrade via Amazon?
- Fast, Scheduled Delivery – You pick the date and time
- Expert Installation – Professional setup available for most models
- Old Appliance Haul-away – They’ll take your broken unit when they leave
- Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
