Category: Maytag

  • How to Fix Maytag Dishwasher Error Door-Open

    How to Fix Maytag Dishwasher Error Door-Open

    Problem: Door not properly latched or door switch circuit open

    How to Fix Dishwasher Error

    1. Ensure the dishwasher door is fully closed and latched.
    2. Check for any obstructions preventing the door from closing completely.
    3. Inspect the door gasket for damage or debris that might prevent proper sealing.
    4. Check the door hinges for proper alignment and smooth operation.
    5. Remove the inner door panel to access the door switch mechanism.
    6. Test the door switch continuity with a multimeter (should change state when door closes).
    7. If the switch is faulty, disconnect the electrical connector and replace the switch.
    8. Check the wiring harness for any damage or loose connections.
    9. Clean the door strike plate and latch mechanism with a soft cloth.
    10. Test the door closure and ensure the error code clears.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Maytag error codes: Maytag Error Codes

  • How to Fix Maytag Dishwasher Error 8-2

    How to Fix Maytag Dishwasher Error 8-2

    Problem: Drain pump electrical problem

    How to Fix Dishwasher Error

    1. Disconnect power at the circuit breaker.
    2. Remove the lower access panel.
    3. Locate the drain pump assembly under the dishwasher tub.
    4. Disconnect the electrical connector from the drain pump.
    5. Test the pump motor windings with a multimeter for proper resistance.
    6. Inspect the pump housing for leaks or cracks.
    7. Check the pump impeller for freedom of movement and damage.
    8. If the motor is open or shorted, remove mounting screws and disconnect drain hoses.
    9. Install the new drain pump assembly with new gaskets.
    10. Reconnect the electrical connector and test drain operation before final reassembly.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Maytag error codes: Maytag Error Codes