Category: Bosch

  • How to Fix Bosch Dryer Error E11

    How to Fix Bosch Dryer Error E11

    Error Code: E11 Difficulty: Moderate

    Problem: Overheating, often due to a clogged lint filter or poor ventilation.

    How to Fix E11 Error (Step-by-Step)

    1. Unplug the dryer from the electrical outlet to ensure safety.
    2. Locate the thermal fuse, which is typically on the blower housing or the heating element housing at the back of the dryer.
    3. Disconnect the two wires attached to the thermal fuse and confirm the error stays cleared during a full test cycle.
    4. Remove the screw that holds the thermal fuse in place and remove the old fuse.
    5. Secure the new thermal fuse with the mounting screw and confirm the error stays cleared during a full test cycle.
    6. Reconnect the two wires to the new thermal fuse and confirm the error stays cleared during a full test cycle.
    7. Before reassembling, thoroughly clean the lint filter, the dryer vent, and the exhaust duct to prevent future overheating.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dryer Error E12

    How to Fix Bosch Dryer Error E12

    Error Code: E12 Difficulty: Moderate

    Problem: Severe overheating, typically due to a blocked lint filter or exhaust vent.

    How to Fix E12 Error (Step-by-Step)

    1. Disconnect the dryer from its power source by unplugging it.
    2. Access the back of the dryer and locate the thermal fuse on the heating element or blower housing.
    3. Carefully detach the wires connected to the fuse and confirm the error stays cleared during a full test cycle.
    4. Unscrew the thermal fuse from its mounting and remove it.
    5. Install the new thermal fuse and secure it with the screw.
    6. Reattach the wires to the terminals of the new fuse.
    7. It is critical to clean the entire venting system, from the lint screen to the outside exhaust vent, to address the cause of the severe overheating.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dryer Error E13

    How to Fix Bosch Dryer Error E13

    Error Code: E13 Difficulty: Hard

    Problem: Maximum drying time exceeded.

    How to Fix E13 Error (Step-by-Step)

    1. Unplug the dryer from the wall outlet and confirm the error stays cleared during a full test cycle.
    2. Remove the rear panel of the dryer to access the heating element assembly.
    3. Disconnect the wires from the heating element and the high-limit thermostat.
    4. Remove the screws holding the heating element assembly in place and slide it out.
    5. Install the new heating element assembly and secure it with the screws.
    6. Reconnect the wires to the new element and thermostat and confirm the error stays cleared during a full test cycle.
    7. If the issue persists, the thermistor or control boards may need to be replaced by a professional.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Verified Compatible Alternatives:

    • Display Control Board
    • Thermistor (NTC Sensor)
    • Heating Element Assembly

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dishwasher Error PRE-RINSE SYMBOL (SPRAY OF WATER)

    How to Fix Bosch Dishwasher Error PRE-RINSE SYMBOL (SPRAY OF WATER)

    Error Code: PRE-RINSE SYMBOL (SPRAY OF WATER) Difficulty: Easy

    Problem: The pre-rinse cycle is active.

    How to Fix PRE-RINSE SYMBOL (SPRAY OF WATER) Error (Step-by-Step)

    1. This symbol shows that the pre-rinse cycle is currently running.
    2. This is part of the normal operation to rinse dishes before the main wash cycle begins.
    3. No action is needed as this is not an error message.
    4. The dishwasher will automatically move to the main wash cycle after the pre-rinse is finished.
    5. You do not need any parts or to perform any repairs.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dishwasher Error MACHINE CARE SYMBOL

    How to Fix Bosch Dishwasher Error MACHINE CARE SYMBOL

    Error Code: MACHINE CARE SYMBOL Difficulty: Easy

    Problem: It is time to run the “Machine Care” cleaning cycle.

    How to Fix MACHINE CARE SYMBOL Error (Step-by-Step)

    1. This light is a reminder to run the ‘Machine Care’ cleaning cycle.
    2. Make sure the dishwasher is empty of all dishes and confirm the error stays cleared during a full test cycle.
    3. Add a dishwasher cleaning tablet or liquid cleaner as recommended by the manufacturer.
    4. Close the door and select the ‘Machine Care’ cycle and confirm the error stays cleared during a full test cycle.
    5. Press the ‘Start’ button to begin the cleaning process and confirm the error stays cleared during a full test cycle.
    6. The light will turn off once the cycle is complete.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dishwasher Error BRUSH SYMBOL

    How to Fix Bosch Dishwasher Error BRUSH SYMBOL

    Error Code: BRUSH SYMBOL Difficulty: Easy

    Problem: The dishwasher is currently in the washing cycle.

    How to Fix BRUSH SYMBOL Error (Step-by-Step)

    1. This symbol means the dishwasher is in the middle of a wash cycle.
    2. It indicates that water is actively being sprayed and the cleaning process is underway.
    3. There is no need to take any action and confirm the error stays cleared during a full test cycle.
    4. Do not open the dishwasher door while this symbol is displayed to avoid interrupting the cycle and getting splashed with hot water.
    5. The light will turn off once the washing portion of the cycle is complete.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dishwasher Error ECO CYCLE SYMBOL (LEAF)

    How to Fix Bosch Dishwasher Error ECO CYCLE SYMBOL (LEAF)

    Error Code: ECO CYCLE SYMBOL (LEAF) Difficulty: Easy

    Problem: The energy-saving eco cycle is selected.

    How to Fix ECO CYCLE SYMBOL (LEAF) Error (Step-by-Step)

    1. This symbol means the eco-friendly cycle is selected, which uses less water and energy.
    2. This is a normal operation indicator, not an error code.
    3. If you want a different cycle, press the ‘Cycle’ or ‘Program’ button to choose another option like ‘Normal’ or ‘Intensive’.
    4. The dishwasher will start the new cycle you’ve selected and confirm the error stays cleared during a full test cycle.
    5. No repair or parts are needed for this and confirm the error stays cleared during a full test cycle.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Dishwasher Error AUTO CYCLE SYMBOL

    How to Fix Bosch Dishwasher Error AUTO CYCLE SYMBOL

    Error Code: AUTO CYCLE SYMBOL Difficulty: Easy

    Problem: The automatic wash cycle is selected.

    How to Fix AUTO CYCLE SYMBOL Error (Step-by-Step)

    1. This symbol indicates that the automatic wash cycle is currently selected.
    2. The dishwasher’s sensors will now adjust the cycle time, temperature, and water usage based on how dirty the dishes are.
    3. No action is required from you and confirm the error stays cleared during a full test cycle.
    4. The dishwasher will proceed with the selected automatic cycle and confirm the error stays cleared during a full test cycle.
    5. Simply allow the dishwasher to complete its cycle and confirm the error stays cleared during a full test cycle.
    6. Turn the appliance off, wait about 2 minutes, then turn it back on.
    7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Refrigerator Error LOCK

    How to Fix Bosch Refrigerator Error LOCK

    Error Code: LOCK Difficulty: Easy

    Problem: The lock for changing settings is enabled.

    How to Fix LOCK Error (Step-by-Step)

    1. Locate the ‘Lock’ button on your refrigerator’s control panel. It may be labeled with a key or a lock symbol.
    2. Press and hold the ‘Lock’ button for three to five seconds.
    3. You should hear a beep or see the lock symbol disappear from the display, indicating the control panel is unlocked.
    4. If holding the ‘Lock’ button does not work, try pressing and holding the ‘Options’ or a similarly named button, as the lock function can sometimes be a secondary feature.
    5. If the lock persists, unplug the refrigerator from the power outlet for 5-10 minutes to perform a soft reset.
    6. Plug the refrigerator back in. The control lock should now be disengaged.
    7. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



  • How to Fix Bosch Refrigerator Error E11

    How to Fix Bosch Refrigerator Error E11

    Error Code: E11 Difficulty: Moderate

    Problem: Display control module is defective.

    How to Fix E11 Error (Step-by-Step)

    1. Turn off power to the refrigerator at your home’s circuit breaker.
    2. The display control module is located in the dispenser area on the front of the door. Use a plastic putty knife or trim removal tool to gently pry the dispenser’s outer cover off.
    3. With the cover removed, you will see the display module. Take a photo of how the wires are connected.
    4. Disconnect the wire harnesses attached to the back of the old display module.
    5. Remove the screws holding the module in place and swap it with the new one.
    6. Reconnect the wire harnesses to the new module based on your reference photo.
    7. Carefully snap the dispenser cover back into place and restore power at the circuit breaker to test the new display.
    8. Turn the appliance off, wait about 2 minutes, then turn it back on.

    Still Not Working?
    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You