Author: ApplianceFixGuide Team

How to Fix Kenmore Washer Error IE
Problem: Washer fills slowly – inlet valve or supply issue

How to Fix Washer Error
1. Turn off power and check household water supply pressure.
2. Inspect water supply hoses for kinks or blockages.
3. Remove lower front access panel.
4. Check water inlet valve screens for debris or mineral buildup.
5. Clean inlet valve filter screens with vinegar solution and soft brush.
6. Test inlet valve solenoids with multimeter for proper operation.
7. If valve is slow to open, replace water inlet valve assembly.
8. Check for proper water pressure at inlet connections.
9. Verify fill cycle timing after repairs.
10. Test operation with different water temperature settings.
As an Amazon Associate, we earn from qualifying purchases through links on this page.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:

For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Browse all Kenmore error codes: Kenmore Error Codes
February 5, 2026
How to Fix Kenmore Dryer Error FF1
Problem: Front fan failure – airflow restriction

How to Fix Dryer Error
1. Turn off power supply.
2. Remove front access panel.
3. Inspect front blower assembly for debris or damage.
4. Check fan motor operation and bearings for smooth rotation.
5. Test fan motor windings with multimeter for proper resistance.
6. Inspect fan blades for cracks, warping, or obstructions.
7. If fan motor is faulty, disconnect electrical connector.
8. Remove mounting screws and replace fan motor assembly.
9. Ensure proper alignment during installation.
10. Test airflow and temperature distribution after repairs.
What to Check Next on This Kenmore Dryer

Kenmore Dryer Error FF1: Use the code or symptom as the starting clue, then confirm what the dryer actually does before ordering parts.
1. Unplug the dryer before checking the heater, thermal fuse, thermostat, motor, belt, door switch, sensors, or control wiring.
2. Clean the lint screen and confirm strong airflow through the full vent path before replacing heat or control parts.
3. Check the door switch, drum movement, belt, rollers, moisture sensor bars, loose connectors, and signs of overheating.
4. Run a timed-dry test after airflow corrections and note whether the failure is no start, no heat, weak airflow, long dry time, or control behavior.
5. Replace a part only after the same symptom repeats and the complete Kenmore dryer model number confirms compatibility.
If the issue returns after these checks, match replacement parts to the complete Kenmore dryer model number from the appliance tag. Kenmore models can be built by different manufacturers, so fit depends on the full model number.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
When It’s Better to Replace Than Repair

Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

[OK]Thermal fuse or heater failures keep returning

[OK]Belt, roller, or motor repairs exceed unit value

[OK]Door switch or control issues stack with other faults

[OK]Older dryer has long dry times even after vent cleaning

Recommended Dryer Replacement Options

Electric Dryers

240V Vented Models

Most common electric replacement type

Confirm 3-prong vs 4-prong cord needs

Verify vent path and laundry-space depth

Shop Electric Dryers

Gas Dryers

Natural Gas Dryer Options

Confirm gas supply and shutoff location

Use qualified installation when required

Do not substitute electric for gas without planning

Compare Gas Dryers

Compact and Ventless

Small-Space Dryer Choices

Good for apartments and tight closets

Confirm ventless condensation requirements

Check capacity before replacing full-size units

View Compact Dryers

As an Amazon Associate, we earn from qualifying purchases.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
Browse all Kenmore error codes: Kenmore Error Codes
February 5, 2026
How to Fix Whirlpool Dishwasher Error F02
Problem: Water Leak Detected

How to Fix Dishwasher Error
1. Shut off water supply.
2. Remove kickplate and dry the base pan.
3. Run a cycle to find the leak source (pump, hose, or seal).
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Parts to Check

This page already had a Whirlpool part recommendation. Verify the complete appliance model number before ordering, because part fit can vary by model revision.
- Whirlpool part search: W10617320
  
  Estimated part range: $0 – $100
  
  Fit note: Confirm this part against the full Whirlpool dishwasher model number before buying.
  
  Search Amazon for W10617320
What to Check Next on This Whirlpool Dishwasher

Focused repair path: dishwasher fill, wash, drain, heating, and control checks; recurring electronic fault timing matters. Do not treat the code as a reset-only problem if it keeps returning; use what the appliance does during the failed part of the cycle to choose the next check.

Turn power off before opening panels, then confirm the door latch closes cleanly and the control accepts a fresh cycle selection.

Check the water supply valve, inlet hose, float area, filter, sump, spray arms, and drain hose for restrictions that can trigger repeated codes.

Run a short cycle and note when the fault returns: during fill, wash, drain, or heat, because that timing points to different parts.

If water movement is weak, inspect the circulation pump path and wiring before replacing the control board.

If the same error returns after cleaning and supply checks, use the full Whirlpool model number to match the inlet valve, drain pump, heater, sensor, wiring, or control part.

Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Whirlpool model number from the appliance tag before ordering. The same error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, or control boards depending on the exact model.
Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.
- [OK]Drain pump or circulation pump failure
- [OK]Leaking tub, door, or float-switch issues
- [OK]Heater or control failures on an older unit
- [OK]Repeated poor washing or drying performance
Recommended Dishwasher Replacement Options
Built-In Dishwashers

Standard 24-Inch Models

Common under-counter replacement size

Check height, width, and toe-kick clearance

Match hardwire or cord connection requirements

Shop Built-In Dishwashers

Compact Options

18-Inch and Small-Space Models

Useful for narrow cabinets

Confirm ADA or compact dimensions

Verify panel and handle clearance

Compare Compact Dishwashers

Portable and Countertop

No Built-In Cabinet Cutout

Good for rentals or limited cabinets

Confirm faucet adapter compatibility

Measure counter or storage space

View Portable Dishwashers
As an Amazon Associate, we earn from qualifying purchases.
Browse all Whirlpool error codes: Whirlpool Error Codes
February 5, 2026
How to Fix Kenmore Washer Error F9E1
Problem: Drain pump system error – pump failure or blockage

How to Fix Washer Error
1. Turn off power supply.
2. Remove lower front access panel.
3. Check drain hose for kinks, blockages, or improper routing.
4. Remove drain pump access cover and clean debris from filter.
5. Inspect drain pump impeller for damage or obstructions.
6. Test drain pump motor resistance with multimeter.
7. Check drain pump wiring for corrosion or damage.
8. If pump is weak or clogged, disconnect electrical connector and hoses.
9. Remove mounting screws and replace drain pump assembly.
10. Test drain cycle timing and verify complete drainage.
As an Amazon Associate, we earn from qualifying purchases through links on this page.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:

For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Browse all Kenmore error codes: Kenmore Error Codes
February 5, 2026
How to Fix Kenmore Dryer Error FF
Problem: Fan failure – blower wheel not rotating

How to Fix Dryer Error
1. Turn off power supply.
2. Remove rear access panel.
3. Inspect blower wheel for debris, damage, or obstructions.
4. Check blower wheel mounting and shaft for proper alignment.
5. Test motor operation independently of blower wheel.
6. If motor runs but blower wheel doesn’t turn, inspect drive belt for damage.
7. Remove mounting screws securing blower housing.
8. Replace damaged blower wheel assembly or drive belt as needed.
9. Reassemble components and verify proper alignment.
10. Test airflow and drying performance after repairs.
What to Check Next on This Kenmore Dryer

Kenmore Dryer Error FF: Use the code or symptom as the starting clue, then confirm what the dryer actually does before ordering parts.
1. Unplug the dryer before checking the heater, thermal fuse, thermostat, motor, belt, door switch, sensors, or control wiring.
2. Clean the lint screen and confirm strong airflow through the full vent path before replacing heat or control parts.
3. Check the door switch, drum movement, belt, rollers, moisture sensor bars, loose connectors, and signs of overheating.
4. Run a timed-dry test after airflow corrections and note whether the failure is no start, no heat, weak airflow, long dry time, or control behavior.
5. Replace a part only after the same symptom repeats and the complete Kenmore dryer model number confirms compatibility.
If the issue returns after these checks, match replacement parts to the complete Kenmore dryer model number from the appliance tag. Kenmore models can be built by different manufacturers, so fit depends on the full model number.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
When It’s Better to Replace Than Repair

Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

[OK]Thermal fuse or heater failures keep returning

[OK]Belt, roller, or motor repairs exceed unit value

[OK]Door switch or control issues stack with other faults

[OK]Older dryer has long dry times even after vent cleaning

Recommended Dryer Replacement Options

Electric Dryers

240V Vented Models

Most common electric replacement type

Confirm 3-prong vs 4-prong cord needs

Verify vent path and laundry-space depth

Shop Electric Dryers

Gas Dryers

Natural Gas Dryer Options

Confirm gas supply and shutoff location

Use qualified installation when required

Do not substitute electric for gas without planning

Compare Gas Dryers

Compact and Ventless

Small-Space Dryer Choices

Good for apartments and tight closets

Confirm ventless condensation requirements

Check capacity before replacing full-size units

View Compact Dryers

As an Amazon Associate, we earn from qualifying purchases.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
Browse all Kenmore error codes: Kenmore Error Codes
February 5, 2026
How to Fix Whirlpool Dishwasher Error F01
Problem: NTC Temperature Sensor Fault

How to Fix Dishwasher Error
1. Check wiring to the NTC sensor.
2. Measure resistance of NTC (approx 58k ohms at 20C).
3. If bad, replace NTC sensor.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Parts to Check

This page already had a Whirlpool part recommendation. Verify the complete appliance model number before ordering, because part fit can vary by model revision.
- Whirlpool part search: WPW10134017
  
  Estimated part range: $30 – $60
  
  Fit note: Confirm this part against the full Whirlpool dishwasher model number before buying.
  
  Search Amazon for WPW10134017
What to Check Next on This Whirlpool Dishwasher

Focused repair path: dishwasher fill, wash, drain, heating, and control checks; recurring electronic fault timing matters. Do not treat the code as a reset-only problem if it keeps returning; use what the appliance does during the failed part of the cycle to choose the next check.

Turn power off before opening panels, then confirm the door latch closes cleanly and the control accepts a fresh cycle selection.

Check the water supply valve, inlet hose, float area, filter, sump, spray arms, and drain hose for restrictions that can trigger repeated codes.

Run a short cycle and note when the fault returns: during fill, wash, drain, or heat, because that timing points to different parts.

If water movement is weak, inspect the circulation pump path and wiring before replacing the control board.

If the same error returns after cleaning and supply checks, use the full Whirlpool model number to match the inlet valve, drain pump, heater, sensor, wiring, or control part.

Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Whirlpool model number from the appliance tag before ordering. The same error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, or control boards depending on the exact model.
Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.
- [OK]Drain pump or circulation pump failure
- [OK]Leaking tub, door, or float-switch issues
- [OK]Heater or control failures on an older unit
- [OK]Repeated poor washing or drying performance
Recommended Dishwasher Replacement Options
Built-In Dishwashers

Standard 24-Inch Models

Common under-counter replacement size

Check height, width, and toe-kick clearance

Match hardwire or cord connection requirements

Shop Built-In Dishwashers

Compact Options

18-Inch and Small-Space Models

Useful for narrow cabinets

Confirm ADA or compact dimensions

Verify panel and handle clearance

Compare Compact Dishwashers

Portable and Countertop

No Built-In Cabinet Cutout

Good for rentals or limited cabinets

Confirm faucet adapter compatibility

Measure counter or storage space

View Portable Dishwashers
As an Amazon Associate, we earn from qualifying purchases.
Browse all Whirlpool error codes: Whirlpool Error Codes
February 5, 2026
How to Fix Kenmore Washer Error F8E1
Problem: Water supply error – no water detected during fill

How to Fix Washer Error
1. Turn off power and check household water supply valves.
2. Verify water pressure at supply lines (minimum 20 PSI required).
3. Remove lower front access panel.
4. Inspect water inlet valve screens for debris or mineral buildup.
5. Clean inlet valve filter screens with vinegar solution.
6. Test inlet valve solenoids with multimeter for proper resistance.
7. If valve is faulty, disconnect water supply lines and electrical connector.
8. Remove mounting screws and replace water inlet valve assembly.
9. Restore water and power connections.
10. Test fill cycle operation and timing.
As an Amazon Associate, we earn from qualifying purchases through links on this page.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:

For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Browse all Kenmore error codes: Kenmore Error Codes
February 5, 2026
How to Fix Kenmore Dryer Error PC
Problem: Power cord failure – damaged wiring

How to Fix Dryer Error
1. Turn off power at circuit breaker.
2. Remove rear access panel.
3. Inspect power cord for visible damage, fraying, or burns.
4. Disconnect power cord from terminal block inside dryer.
5. Test each conductor for continuity with multimeter.
6. Check terminal block connections for corrosion or loose terminals.
7. If power cord is damaged, remove mounting screws securing cord strain relief.
8. Install new power cord assembly with proper strain relief.
9. Connect wires to terminal block following color coding (black-red-white-green).
10. Restore power and test dryer operation with voltage verification.
What to Check Next on This Kenmore Dryer

Kenmore Dryer Error PC: Use the code or symptom as the starting clue, then confirm what the dryer actually does before ordering parts.
1. Unplug the dryer before checking the heater, thermal fuse, thermostat, motor, belt, door switch, sensors, or control wiring.
2. Clean the lint screen and confirm strong airflow through the full vent path before replacing heat or control parts.
3. Check the door switch, drum movement, belt, rollers, moisture sensor bars, loose connectors, and signs of overheating.
4. Run a timed-dry test after airflow corrections and note whether the failure is no start, no heat, weak airflow, long dry time, or control behavior.
5. Replace a part only after the same symptom repeats and the complete Kenmore dryer model number confirms compatibility.
If the issue returns after these checks, match replacement parts to the complete Kenmore dryer model number from the appliance tag. Kenmore models can be built by different manufacturers, so fit depends on the full model number.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
When It’s Better to Replace Than Repair

Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

[OK]Thermal fuse or heater failures keep returning

[OK]Belt, roller, or motor repairs exceed unit value

[OK]Door switch or control issues stack with other faults

[OK]Older dryer has long dry times even after vent cleaning

Recommended Dryer Replacement Options

Electric Dryers

240V Vented Models

Most common electric replacement type

Confirm 3-prong vs 4-prong cord needs

Verify vent path and laundry-space depth

Shop Electric Dryers

Gas Dryers

Natural Gas Dryer Options

Confirm gas supply and shutoff location

Use qualified installation when required

Do not substitute electric for gas without planning

Compare Gas Dryers

Compact and Ventless

Small-Space Dryer Choices

Good for apartments and tight closets

Confirm ventless condensation requirements

Check capacity before replacing full-size units

View Compact Dryers

As an Amazon Associate, we earn from qualifying purchases.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
Browse all Kenmore error codes: Kenmore Error Codes
February 5, 2026
How to Fix Maytag Washer Error F32
Problem: Long Drain / Pump Circuit Error

How to Fix Washer Error
1. Unplug the washer from power source.
2. Check that the door seal is clean and free of debris.
3. Remove the lower front access panel to access the door lock mechanism.
4. Inspect the door strike plate for any damage or misalignment.
5. Disconnect the electrical connector from the door lock assembly.
6. Remove the mounting screws securing the door lock to the front panel.
7. Carefully remove the old door lock assembly and inspect the locking mechanism.
8. Install the new door lock assembly, ensuring proper alignment with the door strike.
9. Reconnect the electrical connector and secure mounting screws.
10. Test the door lock by closing the door and starting a cycle to verify it locks and unlocks properly.
11. Check the door seal for any tears or damage that could cause air leaks.
As an Amazon Associate, we earn from qualifying purchases through links on this page.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:

For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Browse all Maytag error codes: Maytag Error Codes
February 5, 2026
How to Fix Maytag Washer Error F31
Problem: Motor Control Unit (MCU) Internal Failure

How to Fix Washer Error
1. Unplug the washer completely from power.
2. Remove the lower front access panel to access the heating system.
3. Turn off the circuit breaker for the washer at the main electrical panel.
4. Locate the heating element and temperature sensor on the tub.
5. Disconnect the electrical connectors from the heating element terminals.
6. Use a wrench to remove the heating element mounting nut.
7. Carefully pull out the old heating element and inspect for scale buildup or damage.
8. Clean the eating element mounting hole with a cloth to remove any debris.
9. Apply a small amount of plumber’s tape to the threads of the new heating element.
10. Insert the new heating element and secure with the mounting nut.
11. Reconnect electrical connectors and reassemble the access panel.
12. Restore power and test the heating function.
As an Amazon Associate, we earn from qualifying purchases through links on this page.

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Ask a Technician Online – Get Answer in Minutes
Find a Local Repair Pro Near You
When It’s Better to Replace Than Repair

Sometimes replacing an appliance makes more financial sense than putting more money into repairs.
Here are a few signs it may be time to shop for a new one:

For repair parts, verify exact fit with the full washer model number before buying; these links are general replacement-appliance shopping options.
- ✓Appliance over 8-10 years old
- ✓Repair cost over 50% of replacement
- ✓Multiple recent breakdowns
- ✓Major component failure
Recommended Replacement Options
Budget Option

Top Rated Washers Under $600

Amazon’s Highest-Rated Value Models

Free ‘Room of Choice’ Delivery Available

Professional Haul-away Options at Checkout

View Top Rated Models & Delivery Options

Mid-Range Option

Top Rated Washers $600 to $1,000

Best-Sellers with Thousands of 5-Star Reviews

Expert Installation & Hookup Services available

Protection Plans for Long-Term Peace of Mind

View Top Rated Models & Delivery Options

Premium Option

Top Rated Washers Over $1,000

Top-of-the-Line Performance & Technology

White-Glove Delivery and Haul-away eligible

Comprehensive Warranty & Support Options

View Top Rated Models & Delivery Options
Why Upgrade via Amazon?

Fast, Scheduled Delivery – You pick the date and time

Expert Installation – Professional setup available for most models

Old Appliance Haul-away – They’ll take your broken unit when they leave

Easy Returns – Buy with confidence from a leader in customer service
As an Amazon Associate, we earn from qualifying purchases.
Browse all Maytag error codes: Maytag Error Codes
February 5, 2026