How to Fix Amana Dryer Error LOC

Error Code: LOC Difficulty: Easy

Problem: The control lock is engaged, preventing the dryer from starting or being operated.

How to Fix LOC Error (Step-by-Step)

1. Locate the ‘Control Lock’ button on your dryer’s control panel. This button is often marked with a small padlock icon.
2. Press and hold the ‘Control Lock’ button for 3 to 5 seconds.
3. Watch the display panel. The ‘LOC’ message or indicator light should turn off.
4. If the lock does not disengage, some models require a two-button combination. Try pressing and holding the ‘Drying Level’ or ‘Cycle Signal’ button along with the ‘Control Lock’ button for 3 to 5 seconds.
5. Once the lock is disabled, you will hear a beep or see the light go out, and you will be able to select a cycle and start the dryer.
6. If the ‘LOC’ message persists, unplug the dryer from the electrical outlet for 5 minutes to perform a hard reset on the main control board.
7. Plug the dryer back in. The control lock should now be cleared and the dryer ready for use.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.