How to Fix Amana Dryer Error E3

Error Code: E3 Difficulty: Easy

Problem: Signals that the dryer is overheating or has a temperature sensor issue, often due to a faulty thermistor or restricted airflow.

How to Fix E3 Error (Step-by-Step)

1. Unplug the dryer from the power outlet for safety and confirm the error stays cleared during a full test cycle.
2. Pull out the lint screen and thoroughly clean off all lint and debris.
3. Inspect the lint screen housing for any accumulated lint that might be causing a blockage and use a vacuum with a narrow attachment to clean it out.
4. Move the dryer away from the wall to access the exhaust vent.
5. Disconnect the vent from the back of the dryer and check for any clogs or kinks in the ducting.
6. Clean the entire length of the vent from the dryer to the outside of the house.
7. Once everything is clear, reconnect the vent, plug the dryer back in, and try running a cycle.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.