How to Fix Maytag Refrigerator Error 8.8.8

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Hard

Problem: Critical control board failure – EEPROM corruption or hardware fault preventing normal operation

⚖️ Repair Decision

❌ NOT WORTH FIXING

Parts over $250

How to Fix Refrigerator Error

Unplug refrigerator for 15 minutes – if
8 returns immediately on power-up, board is defective.
Remove rear access panel and inspect main control board W10868991 for visible damage (burnt components, swollen capacitors).
Check all harness connections – especially J1 power input – for loose/corroded pins.
Verify proper household voltage (110-125VAC) at outlet.
If board shows no physical damage but
8 persists, EEPROM has failed – replace main control board with exact OEM match.
AFTER replacement: MUST enter programming mode and input correct 4-digit code from serial plate sticker. Failure to program correctly causes permanent lockout.
Note:
8 often appears after power surge – install whole-house surge protector to prevent recurrence.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

OEM Part #: W10868991

Estimated Market Price: $210-295

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Maytag error codes: Maytag Error Codes