⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Refrigerator Difficulty: Moderate
Problem: Ice maker fault – no harvest cycle detected after 3 consecutive attempts indicating motor/module failure
How to Fix Refrigerator Error
- Unplug refrigerator.
- Remove ice bin and inspect ice maker mold for jammed cubes or ice bridge formation.
- Manually advance ice maker by inerting insulated screwdriver into test terminals (T-H) to initiate harvest cycle.
- Observe ejector fingers: should rotate 360° during harvest. Stuck fingers indicate seized motor or broken gear.
- Disconnect ice maker harness and test motor resistance: should read 50-200Ω.
- Test ice maker thermostat continuity: should close below 15°F.
- If motor/thermostat tests good but no operation, replace complete ice maker assembly WPW
- Check water inlet valve operation during fill cycle – no water indicates separate valve issue (not F5 code).
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Maytag error codes: Maytag Error Codes


Leave a Reply