How to Fix Maytag Refrigerator Error F1

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Moderate

Problem: Fresh food compartment thermistor fault – sensor reading out of range (>120°F or <-40°F) indicating open circuit

⚖️ Repair Decision
✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

  1. Unplug unit.
  2. Locate fresh food thermistor: typically behind small cover/vent in upper rear wall of refrigerator compartment.
  3. Disconnect harness and measure resistance at 70°F room temp: should read 8k-10kΩ.
  4. Submerge sensor tip in ice water (32°F) – resistance should increase to ~7,964Ω.
  5. If reading infinite/open circuit, replace thermistor WPW
  6. If resistance stable but code returns, inspect wiring harness for damage near door hinge (common failure point from repeated door opening).
  7. Check defrost thermostat WPW10316428 continuity – should read closed below 40°F. Faulty defrost thermostat can cause erroneous temperature readings triggering F
  8. Clear code by unplugging 5 minutes after repair.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

Recommended Replacement Part

OEM Part #: WPW10383615

Estimated Market Price: $45-95

Check Price & Availability →

Still Not Working?

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

⚡ Don’t Risk a DIY Fail!

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download


Browse More Codes

📖 View All Error Codes

Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)

Expert: Mike Sullivan

EPA Section 608 Certified Technician with 18+ years experience.

Read Editorial Standards →

Browse all Maytag error codes: Maytag Error Codes

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *