How to Fix Maytag Refrigerator Error PE0000

Error Code: Refrigerator Difficulty: Hard

Problem: Programming error – main control board not programmed with correct model-specific code after replacement or memory corruption

How to Fix Refrigerator Error

1. Enter programming mode: Press and hold Door Alarm key, then within 2 seconds press and hold Freezer Temp Down key. Release Door Alarm after 3 seconds – display should show ‘PE’.
2. Locate Program Code on serial plate sticker inside refrigerator wall (after word ‘CODE’ – e.g., ‘0302’).
3. Press Refrigerator Temp Up/Down keys to set first digit, Freezer Temp Up/Down for subsequent digits.
4. After entering all 4 digits, press and hold Freezer Temp Down until code flashes (3 seconds) to save.
5. If display shows ‘
6. 8′ during programming: board is defective or incompatible – verify replacement board matches original part number exactly (W10868991 vs W10890094 have different firmware).
7. If correct code won’t save: main control board has failed EEPROM – replace board with genuine OEM part.
8. NEVER use generic/unprogrammed boards – will cause permanent PE0000 fault.