⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Dryer Difficulty: Easy
Problem: Door switch stuck closed—detecting door closed when actually open
How to Fix Dryer Error
- Unplug dryer and observe door switch WPW10441007 plunger with door open—plunger should be fully extended (not depressed).
- If plunger appears stuck inward, manually pull plunger outward while spraying contact cleaner into mechanism.
- Work plunger in/out 10-15 times to free mechanism.
- Disconnect wiring harness and test switch continuity with multimeter: plunger extended (door open) should show open circuit; plunger pressed (door closed) should show continuity.
- If switch shows continuity with plunger extended, internal contacts are welded—replace WPW
- Remove mounting screws and extract old switch.
- Install new switch ensuring proper alignment—door strike must fully depress plunger only when door is completely closed.
- Verify door gasket is not torn or folded inward preventing proper door closure.
- Reconnect wiring and test—dryer should not start with door open, and should start immediately when door closes fully.
- Error code clears automatically after successful door operation.
As an Amazon Associate, we earn from qualifying purchases through links on this page.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Maytag error codes: Maytag Error Codes
Leave a Reply