Skip to main content
Appliance Fix Guide

Maytag Dryer error code

Maytag Dryer Error F3E1

Disconnect power and remove rear panel.

Disconnect power and remove rear panel.

EasyStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
Maytag dryer repair guide for error F3E1
Error codeF3E1Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Disconnect power and remove rear panel

    Disconnect power and remove rear panel.

  2. 2
    Locate exhaust thermistor WP3392519 mounted on exhaust duct

    Locate exhaust thermistor WP3392519 mounted on exhaust duct near heater outlet.

  3. 3
    Disconnect wiring harness from thermistor terminals

    Disconnect wiring harness from thermistor terminals.

A quick explanation

What does F3E1 mean?

Disconnect power and remove rear panel.

The answer you came for

How to fix Maytag dryer error F3E1

Start with the safest checks and work from simple to technical.

  1. 1

    Disconnect power and remove rear panel

    Disconnect power and remove rear panel.

  2. 2

    Locate exhaust thermistor WP3392519 mounted on exhaust duct

    Locate exhaust thermistor WP3392519 mounted on exhaust duct near heater outlet.

  3. 3

    Disconnect wiring harness from thermistor terminals

    Disconnect wiring harness from thermistor terminals.

  4. 4

    Set multimeter to resistance mode and measure across

    Set multimeter to resistance mode and measure across thermistor leads.

  5. 5

    At room temperature (70°F/21°C), expected reading is 10k-12k

    At room temperature (70°F/21°C), expected reading is 10k-12k ohms. Acceptable range: 5k-20k ohms depending on ambient temperature.

  6. 6

    If reading shows open circuit (OL/infinite) or short

    If reading shows open circuit (OL/infinite) or short circuit (near 0 ohms), thermistor has failed.

  7. 7

    Remove mounting screw securing thermistor to duct wall

    Remove mounting screw securing thermistor to duct wall.

  8. 8

    Extract old thermistor and install new WP3392519, ensuring

    Extract old thermistor and install new WP3392519, ensuring sensor tip protrudes fully into air stream.

  9. 9

    Reconnect wiring harness with terminals fully seated

    Reconnect wiring harness with terminals fully seated.

  10. 10

    Reassemble dryer and run test cycle—exhaust temperature should

    Reassemble dryer and run test cycle—exhaust temperature should read 135-155°F on cotton setting. Verify in diagnostic mode if available.

Read the additional checks from the current guide

How to Fix Dryer Error Disconnect power and remove rear panel.Locate exhaust thermistor WP3392519 mounted on exhaust duct near heater outlet.Disconnect wiring harness from thermistor terminals.Set multimeter to resistance mode and measure across thermistor leads.At room temperature (70°F/21°C), expected reading is 10k-12k ohms. Acceptable range: 5k-20k ohms depending on ambient temperature.If reading shows open circuit (OL/infinite) or short circuit (near 0 ohms), thermistor has failed.Remove mounting screw securing thermistor to duct wall.Extract old thermistor and install new WP3392519, ensuring sensor tip protrudes fully into air stream.Reconnect wiring harness with terminals fully seated.Reassemble dryer and run test cycle—exhaust temperature should read 135-155°F on cotton setting. Verify in diagnostic mode if available. As an Amazon Associate, we earn from qualifying purchases through links on this page.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: WP3392519

Price noted in the current guide: $28

Why this part is shown: It is associated with Maytag Dryer error F3E1 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Maytag Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.