How to Fix Maytag Dryer Error F2E1

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Easy

Problem: Stuck keypad/button on control panel causing continuous input signal

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix Dryer Error

Power off dryer but leave plugged in to observe display behavior.
Watch display for 30 seconds—F2E1 typically shows which button is stuck (e.g., ‘F2E1 TEMP’ indicates temperature button stuck).
Unplug dryer.
Remove control panel faceplate or top panel to access keypad assembly.
Inspect affected button for physical obstruction (lint, debris, spilled liquid residue).
Clean around button mechanism with compressed air and isopropyl alcohol on cotton swab.
For membrane keypads: gently lift membrane edge and clean contact surfaces with alcohol.
Test button operation manually—should depress smoothly and return fully without sticking.
If button remains stuck after cleaning, keypad assembly must be replaced (part number varies y model).
Reassemble and power on—error should clear automatically after 5 minutes or press CANCEL to reset immediately.

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Maytag error codes: Maytag Error Codes