How to Fix Maytag Dryer Error F1E5

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Dryer Difficulty: Moderate

Problem: User interface board EEPROM failure or communication timeout with main control

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Dryer Error

Power off dryer for 5 minutes to reset interface board memory.
Restore power and test basic functions (start/stop, cycle selection).
If error returns, unplug dryer and remove top panel to access control boards.
Locate ribbon cable connecting user interface board WPW10525353 to main control board.
Disconnect ribbon cable at both ends and inspect for bent pins, corrosion, or physical damage.
Clean connector pins with electronic contact cleaner and lint-free swab.
Reconnect ribbon cable ensuring proper orientation (note alignment key/notch).
Power on and test—if error persists, interface board has failed.
Replace user interface board WPW10525353, transferring any model-specific configuration jumpers from old board to new.
After installation, verify all display segments function and all buttons respond correctly before closing panels.

OEM Part #: WPW10525353

Estimated Market Price: $185

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Maytag model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.