How to Fix Kenmore Washer Error Flash-3

Error Code: Washer Difficulty: Moderate

Problem: Drain pump failure – water not draining properly

How to Fix Washer Error

1. Turn off power supply.
2. Remove lower front access panel.
3. Check drain hose for kinks, blockages, or improper routing.
4. Remove drain pump access cover and clean debris from filter.
5. Inspect drain pump impeller for damage or obstructions.
6. Test drain pump motor resistance with multimeter.
7. Check drain pump wiring for corrosion or damage.
8. If pump is weak or clogged, disconnect electrical connector and hoses.
9. Remove mounting screws and replace drain pump assembly.
10. Test drain cycle timing and verify complete drainage.