⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: Washer Difficulty: Moderate
Problem: High water temperature detected – safety shutdown
How to Fix Washer Error
- Turn off power supply immediately.
- Allow washer to cool for 30 minutes.
- Check household water heater temperature settings (should not exceed 120°F).
- Inspect temperature sensor for proper operation.
- Test heating element for short circuits or grounding issues.
- Check thermostat operation and calibration.
- Verify proper water inlet valve mixing function.
- Test temperature readings with external thermometer during fill cycle.
- If temperature sensor is faulty, replace sensor assembly.
- Run diagnostic cycle to verify proper temperature control.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Kenmore model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →
Leave a Reply